Its 1 Cr 0.5 Mo low alloy steel
Regards,
Go where you are celebrated not where you are tolerated.
Comfort is the enemy of achievement.
Muniyandi Chithiran MBA.,MIIF,
AWS Certified Welding Inspector,
ISO 9001,14001,17025, Lead Auditor,
NDT Level II-RT,UT,MT,PT,
Mobile: 0091 95855 40965,99947 65591
Go where you are celebrated not where you are tolerated.
Comfort is the enemy of achievement.
On Sat, Jan 23, 2016 at 2:46 AM, Elshan Feyzullayev <elshan_f@hotmail.com> wrote:
--Gents
There is a PMI test result which is as follows:
Ni-0.18%, Cr-1.37%, Fe-96.50%, Mn-0.84%, Mo-0.22%. This is a piece of steel pin. Can anyone suggest the rough material grade that this pin has been made off?
Your thoughts will be highly appreciated.
Many thanks
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/HE1PR05MB14334D0F0276A78D94D9CF87EBC40%40HE1PR05MB1433.eurprd05.prod.outlook.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMJSSYkx360f46nXoaPDsraROg4hhARgM7uhcdhV4xgxe-XjCA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment