[MW:24091] Openings Through Welded Joints in vessels

Dear experts

according to sec VIII ug-36 (d):

(d) Openings Through Welded Joints. Additional provisions

governing openings through welded joints are given

in UW-14.

and according to uw-14:

UW-14 OPENINGS IN OR ADJACENT TO WELDS

(a) Any type of opening that meets the requirements

for reinforcement given in UG-37 or UG-39 may be located

in a welded joint.

according to these requirements is it essential to reinforce the OPENINGS IN OR ADJACENT TO WELDS?

Or it should be calculated to see if its necessary.

Best regards.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/00750236-7f63-49ff-a6d9-ddc945f29541%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.