[MW:24156] ratio for consumption of different sizes of welding electrodes

Dear All,

What is the thumb rule to consider consumption ratio if different sizes of electrodes (2.5,3.15 & 4mm) for structural works of different thickness

I am considering 2.5 mm with 25% consumption, 3.15 mm with 50 % consumption & 4 mm with 25% consumption , is it ok?

Regards,

Afroz Shaikh

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f4c1c9c0-734b-40ab-9655-fa5957112901%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.