[MW:24078] SA 387 GR 11 CL 2

Dear All,

Please provide your valuable answer for SA 387 GR 11 CL 2 material and consumable.

Question 1 - X and J factor is applicable to this material ? If yes, then how much X and J factor requirement ?

Question 2 - X and J factor effect on this material 

Question 3 - Do you have any document which shows that X and J factor not mandatory for this material ?

Request to reply with some documents if possible.

Thanks,

Shaunak Upadhyay.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1bc35721-ad0f-4708-9dca-b8cf82089a05%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.