Tuesday, May 5, 2015

Re: [MW:23209] RE: 23206] Failed SSC test

Hi Alan
Based on the same WPQT but conducted on different test coupon the highest hardness value is 244 on the HAZ side.
Do you reckon hardness is the issue?

Thanks.
Amir Zakee

Sent from my BlueBerry 10 semakphone.
From: Alan Denney
Sent: Selasa, 5 Mei 2015 20:23
To: materials-welding@googlegroups.com
Reply To: materials-welding@googlegroups.com
Subject: [MW:23207] RE: 23206] Failed SSC test

Boxbe This message is eligible for Automatic Cleanup! (alan@denney1.freeserve.co.uk) Add cleanup rule | More info

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...