Vào 09:35:59 UTC+7 Thứ tư, ngày 27 tháng tám năm 2014, Mohit Aggarwal đã viết:
What is thk of base metal and process thk you deposited?
Also location of bend test!!
Best Regards,
Mohit Aggarwal.On 25-Aug-2014 3:04 PM, "nguyen tuan" <tuan...@gmail.com> wrote:--DearFollowing specification" Where specified in Contractor Standards or by Licensor, fabrication welds in Type321/321H or 347/347H stainless steels shall be subject to a thermal stabilization at910ºC±10ºC for 4 hours "Best regards,Vào 16:12:00 UTC+7 Thứ hai, ngày 25 tháng tám năm 2014, George Dilintas đã viết:321 is quenched and tempered in order to stabilize the austenite.
Why you did normalizing?
best regards
Dr. Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)Mahendra Arya ---25/08/2014 08:04:12---Dear friend May I know y u have normalizing for 8 hours....
From: Mahendra Arya <mkarya...@gmail.com>
To: material...@googlegroups.com
Date: 25/08/2014 08:04
Subject: Re: [MW:21684] Bend test was broken on A312 TP 321
Sent by: material...@googlegroups.com
Dear friendMay I know y u have normalizing for 8 hours....
Is it any spec or job requirement...On 23-Aug-2014 11:35 am, "nguyen tuan" <tuanpvecc@gmail.com> wrote:
Hi All
when we carryout PQR for material A 312 TP 321 welding to A312 TP 321 (pipe 8'' SCH 120)
1. Welding Process GTAW+SMAW
2.Welding consumable ER347+E347-16
3.Interpass max 175 oC
4.pwht :900 Celsius at 8 hours
5. Code applied ASME
problems: 2 side Bend test were broken
Can some body know or have experience above problem
Tuan
QA/QC posco
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home= &gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home= &gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauverita
s.com
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment