Saturday, August 30, 2014

[MW:21749] Use of 2 welders on sigle large bore piping joint welding

Hello Najm,

In API 1104, paragraph 6, you can qualify your welders using a full circunferential joint or by segments, if you are going to use two or more welders, each one must be qualified in a complete circunferential weld or by segments in flat, vertical and overhead positions.

You should specify in your WPS how many welders are you going to use and direction of welding among others variables. You can look for more information in your specification, contract and construcción code.

Sergio Antonio Muñoz Pinzón
IWE-IIW
http://weld-ing.blogspot.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34919] Welder qualification certificate

Dear All     anyone can share a format for welder certificate and card format        Thanks & Best Regards Saleem manhappulath Mob:+9665...