Might be the problem of un skilled welding operator/ filler wire brands, try with other welding operator/other brands with controlled welding environment/ hood & etc
On Sunday, August 24, 2014, Hrushikesh Sangamnerkar <hrushi612@gmail.com> wrote:
> Dear all,
> I have been working with DSS off late and have found during welder qualifications that there is problem of pinholes while carrying out SAW process.
> Filler dia - 2.4mm
> Material - ER2209
> Have also checked with the baking cycle of flux. It is as per our procedure and sufficient baking and holding is done.
> Kindly give your concurrence in this matter. Anyone experienced the same problem please help.
> Thank you in advance.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
Thank You and Regards
P Govindan
Mobile: +919643152414
Direct : +911294291200
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment