SAES-W-17
The testing shall be in accordance with NACE RP0472 and the requirements
listed below. All welds, for all welding processes and consumables, shall be
tested. The testing location and frequency shall be in accordance with NACE
RP0472. The maximum allowable hardness for P-No. 1 materials is BHN 200.
For all other materials, it shall be the equivalent hardness as specified in
SAES-A-301 (equivalent hardness conversions shall be in accordance with
ASTM E140). Welds for external attachments on tank shells are exempt from
hardness testing.
On Thu, Aug 14, 2014 at 9:33 AM, Muthu Samy <jenieragav@gmail.com> wrote:
--Dear friends,What is the maximum acceptance value for the weld joints after PWHT for Tanks.?Give the code reference.
வாழ்க வளமுடன் என்றும் நலமுடன்
அமீரகம்
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment