[MW:21729] Re: Inspection techniques for non ferrous materails

Hello Asif,

You could use UT with previous calibration.

Sergio Muñoz

http://weld-ING.blogspot.com

El lunes, 4 de agosto de 2014 22:00:58 UTC-5, Asif Shahzad escribió:

Dear Experts,

What kind of inspection Techniques required for thickness measurement of non ferrous piping like PVC in service piping and joint inspection.

 I shall be thankful for your kind consideration.

Regards,

Engr.Asif Shahzad
+923007389793

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.