Dear,
Preheating is required min.100 deg as thk is greater than 25 and it is good engineering practice..
Best Regards,
Mohit Aggarwal.
On 26-Aug-2014 10:44 AM, "Mhaskar Aly" <mhaskar.aly@gmail.com> wrote:
-- Dear Friends,--Kindly clarify whether preheating requirement is based on weld-metal or base metal.I have a PQR with 36mm thk base metal 8mm GTAW & 10mm SMAWWPSBase metal 5-36mmWeldmetal: 20mm max.(SMAW)Weldmetal 16mm max (GTAW)If I have to do10mm fillet weld with SMAW process for 10mm thk Skirt to Base metal 36mm corner joint, is preheating required?Please provide your response with Code referenceThank you in advanceAly
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment