Re: [MW:21243] RT mandatory for PQR

if client spec calls for such requirements , then mandatory.

Usually such mistake occurs ,you can convince your client , by taking RT for the very first production joint welded using that WPS and with  the same welder who had welded the PQR.

the client can accept the PQR, if mechanical & other required test are passed.

Regards

Sudhakar.K

On Mon, Jun 23, 2014 at 4:49 PM, S.Mohammed <mohd52100@gmail.com> wrote:

Dear all,

Code: AsME9/B31.1.

I qualified PQR all test passed.
but due to some communucation problems test piece direct went for machining for sample.

Now client.demand RT report for WPS approval?
Is it mandatory to do RT prior PQR testing?

Regards
Mohd.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.