test will be based on applicable code for design
regards
mahmoud
Date: Wed, 18 Jun 2014 21:43:33 -0700
From: materials-welding@googlegroups.com
To: materials-welding@googlegroups.com
Subject: [MW:21183] test piece dimension for simulation heat treatment pipe
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Date: Wed, 18 Jun 2014 21:43:33 -0700
From: materials-welding@googlegroups.com
To: materials-welding@googlegroups.com
Subject: [MW:21183] test piece dimension for simulation heat treatment pipe
Dear All,
we have the required pipe material heat treatment simulation,
1. Please advice dimension of test piece for simulation.
2. Please advice applicable code to be used.
thank you
Regards
Kurniatullah Sirajudin
we have the required pipe material heat treatment simulation,
1. Please advice dimension of test piece for simulation.
2. Please advice applicable code to be used.
thank you
Regards
Kurniatullah Sirajudin
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment