It all depends on how you write your manual.
There is no need to raise NCR, just recertification is good enough.
If you write in QCM that you will raise NCR for such non-compliance, yes then you need to raise NCR, else no.
Regards
Raghava
On Sat, Jun 21, 2014 at 9:02 PM, 'CHINTUKUMAR GANDHI' via Materials & Welding <materials-welding@googlegroups.com> wrote:
--Dear Experts,Good day to all.Please explain me the correct interpretation of Cl. No. II-200 of Mandatory Appendix II of ASME Sec. IIA Ed. 2013. Actually, we are using SA 106 Gr. B pipes of ASME SA 106 2011a and construction code is ASME Sec. VIII Div. 1 Ed. 2013. Basis on II-200 (b) & (d) of Appendix-II, can I directly accept and recertify this MTR after comparing with SA 106 2013 Ed. or I have to raise a NCR? I think I can directly recertify and accept this MTR. In case, if pipe MTR is ASTM A 106 2011a, then I shall have to raise a NCR, comparasion to be prepared for acceptance of MTR.Please respond me at the earliest to clear my understanding.Thanks & regards,C. R. GANDHI
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Comments