Re: [MW:15026] carbon steel back strip

Back strip will not be considered for RT interpretation.

CVR

On Wed, Jun 20, 2012 at 11:54 PM, eng ahmed <eng_ahmed450@yahoo.com> wrote:

Dear All

I had problem to weld pipe A53GrB using carbon steel back strip techniqe in RT interpretation,May i know the defects of welding the pipes using carbon steel back strip A109 type by GTAW process.

Best Regards

 

       

       Eng: Ahmed Gomaa
         QA/QC Engineer
                EGYPT
Email: Eng_ahmed450@yahoo.com
 Cell:   00201111350805

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.