Hi! As such for 6mm thk weld joint does not require PWHT as per ASME code Regards Hegde
--- On Thu, 2/8/12, Gopalakrishnan G <gopal2408@gmail.com> wrote:
From: Gopalakrishnan G <gopal2408@gmail.com>
Subject: [MW:15010] Stress relieving cycle for 6 mm welded plate
To: materials-welding@googlegroups.com
Date: Thursday, 2 August, 2012, 5:34 PM
What will be the Stress relieving Cycle for 6 mm welded Plate ( IS 2062 Gr.B) as per ASME Sec VIII.what will be the rate of heating and cooling for this material? Please Help me in this regard. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment