Re: [MW:10010] Need advice on Hastelloy C22.

Welding of Hastealloy C22   Suitable Process : GTAW (Root+ Next PASS)                             SMAW : Rest   Joint Detail : Single Vee, Bevel Included angle 60-75 degC,Root opening 0.8-4.0mm, Root Face : 0.8-2.4 mm   Welding consumable GTAW : ER NiCrMo-10                                 SMAW : E NiCrMo-10   Preconditioning of SMAW electrodes : As per Manufacturer Recommendations   PreHeat : Room Temperature Interpass : 93degC maximum   Joint Cleanliness is Imporatnt. J.GERALD JAYAKUMAR 00919344954677   --- On Wed, 2/23/11, vijay <vijayakumarme@gmail.com> wrote: From: vijay <vijayakumarme@gmail.com> Subject: [MW:9996] Need advice on Hastelloy C22. To: materials-welding@googlegroups.com Date: Wednesday, February 23, 2011, 11:36 PM Dear Friends,   I need technical advice to go with Welding on Hastelloy C22 (SB 575, UNS N06022). The maximum thickness of the plate is 12mm and the code as per ASME IX. This requirement is for Gas&Condensate cooler for a offshore platform project. Thanks & Regards, Vijay -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.