My question is on excess penetration for root and not for excess reinforcement.
Generally it is to be minimum for smooth flow of media but I want to know acceptance standard from ASME sec IX or B 31.3.
Regards,
Abhay
Ext 448
IMPORTANT NOTICE:
This email may be confidential, may be legally privileged, and is for the intended recipient only. Unauthorized access, disclosure, copying, distribution, or reliance on any of it by anyone else is prohibited and may be a criminal offense. Please delete if obtained in error and email confirmation to the sender.
From:
Sent: Sunday, February 27, 2011 1:00 PM
To:
Subject: Re: [MW:10036] excess penetration for butt weld joints
Please refer to table 341.3.2 ASME B31.3 for criteria of height of reinforcement
2011/2/24 Abhonkar, Abhay (NAR) <AAbhonkar@dresser-rand.com>
What is the acceptable excess penetration as per the B31.3 or ASME sec?
Whether we can consider the same as defect or discontinuity?
Pl advise.
Regards,
Abhay
Ext 448
IMPORTANT NOTICE:
This email may be confidential, may be legally privileged, and is for the intended recipient only. Unauthorized access, disclosure, copying, distribution, or reliance on any of it by anyone else is prohibited and may be a criminal offense. Please delete if obtained in error and email confirmation to the sender.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to mailto:materials-welding%2Bunsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment