chapter 332 of 31.3 is giving some general specifications about Bending and Forming
Dr. G. Dilintas - Authorized Inspector Supervisor
I&F Regional Technical Manager
Bureau Veritas Piraeus - Greece
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
"Bathula Raghuram (Mumbai - PIPING)" <R.Bathula@ticb.com>
Sent by: materials-welding@googlegroups.com 07/05/2010 09:18
|
|
Not specified in B31.3, generally cold bending is allowed without any heat treatment for non corrosive services with forming strain 20% max for 304/316 materials
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of A D
Sent: Friday, May 07, 2010 10:27 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:5100] Cold Bending
Dear All,
For stainless steel bending and heat treatment which section we need to refer. Please give details.
Advance thanks
Louis
From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Sent: Fri, 7 May, 2010 11:24:38 AM
Subject: RE: [MW:5096] Cold Bending
please refer para 332.2.1
-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of dhinesh gnanadhas
Sent: Thursday, May 06, 2010 4:24 PM
To: Materials & Welding
Subject: [MW:5093] Cold Bending
Dear All,
What is the allowable Diameter differences in the "Cold Bending"?
Pipe material is ASTM A53 GrB for process piping(B31.3)
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment