Dear Sir, Check your WPS whether it is single heat cycle or 60% of the thickness to be weld before welding going to stop, in our project min 60% to be weld shall be completed.
Thanks & Regards
On Thu, 22 Oct 2020, 20:26 Kannayeram Gnanapandithan, <kgpandithan@gmail.com> wrote:
check api 1104, time laps are important if you have specified in WPSTHANKS & BEST REGARDS,KG.PANDITHAN, BE, IWE, CSWIP 3.1,ISO 9712 Level 2 in VT,ASNT-Level II in PT,MT,RT & UT,LA ISO 9001-2015,International Welding Engineer.CONSULTANT-WELDING & QUALITYMobile no: +919940739349--On Thu, Oct 22, 2020 at 5:28 PM dorh <dorrihriz@gmail.com> wrote:
Hello ;
We work for welding activity pipeline 12" X52 thickness 8.38 mm
Root / hot pass GTAW
Filling / cap SMAW
In order to optimize production Contractor propose to proceed with GTAW first , for example for he weld first 10 weld joint GTAW after that he come back tomorrow with and filling and cap weld joint with SMAW.
It's some issue for that ?
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/386e7357-4115-479b-b8bf-45df08b78becn%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePzNafztur0Gku74he5vfSh%2ByffBzkvdf6%2BCrG3iLyurA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABQUuFgDwqcJ4%2BdyeQ214qAjysaLvTcaQb0KDMXYB2PDc2Gtww%40mail.gmail.com.
No comments:
Post a Comment