[MW:31572] Re: Connection built-up section beam

20mm short flange?

No one will approve this.

You may have to change the whole plate.

The shortest length will be L/3.

Engineering allows L/3 as the optimum location for a joint in beams, so the shortest length is L/3. 

L stands for full length of beam. 

On Monday, 19 October 2020 at 09:00:06 UTC+5:30 eng.bas...@gmail.com wrote:

Dear all

During built-up section beam assembly, if the upper flange is short, is it possible to connect a link of length 20cm and what minimum length can be connection

Thank you 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/46596d8e-e5b8-46ea-9abf-95074d16535cn%40googlegroups.com.