Rolling is not forbiten in any Code. Depending on the extreme fiber elongation, metalurgy and service conditions. heat treatment may be required
Στις Τρί, 6 Οκτ 2020, 10:35 ο χρήστης Vivek <vivianlogo@gmail.com> έγραψε:
Dear all,Is it allowed to roll the plate and fabricate conical shape?Does ASME B31.3 , ISO5167 allow it or prohibits? Clause number?Any other standard & clause number which provides requirements to this case?Thank you.Regards,Vivek--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/399e37e6-493a-4647-af4d-bb4237752c90n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40BKAEb-P6e-zLdgS3ZWKXzcxejrmVBbexWht3B4eKcdBA%40mail.gmail.com.
No comments:
Post a Comment