Dear Sir,
For your question
Yes, a WPS is valid based on mentioned PQR as per ASME- IX code.
Because only P number essential variable and group number is not essential variable.
Thanks & Regards
Hany Nabil
On Wed, Oct 21, 2020 at 4:12 PM Manish Kumar <mkmkr431@gmail.com> wrote:
Dear Sir,If P number of material 1 & group number 1 & 2 is mentioned in WPS.While supporting relevant PQR is P number 1 & group number only 2. In this case,Will WPS be valid for relevant PQR.Please advise us .Attachment-WPS & PQR----RegardsManish KumarInspection(Mechanical) EngineerPDIL-HURL Barauni site
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHfQ4k78r-LmTKgXVDyMf_9wE9PtMAo_C8QBbsd6aqpTaHWgwg%40mail.gmail.com.
Best Regards,
Eng. Hany Nabil
Senior Welding Engineer
Petrofac
Engineering and Production Service
Email: eng.hanynabil20@gmail.com
Egypt Mobile: 002-01225622022
This message, including any attachments, may contain confidential and privileged information for the sole use of the intended recipient(s). Review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient, or authorised to receive information on behalf of the recipient, please contact the sender by reply email, and delete all copies of this message. While we have taken reasonable precautions to ensure that this message and any attachments are free from viruses, we cannot guarantee that they are virus free and accept no liability for any damage caused by this message or any attachments. Messages sent or received through our networks may be monitored to ensure compliance with the law, regulation and/or our policies.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAP1YJmRVwRqiLBh-PqJcbpDiq6GLMaDtgaAf%2BdrM_xhN6mrbxw%40mail.gmail.com.
No comments:
Post a Comment