Welding position here is as per ISO 15614-1 Not AWS D1.1 as i said before and clearly mentioned in WPS and subject title
as per ISO 15164-1
This means only PG and H-LO45 need to be separately qualified , and if qualified for any position all other position will be qualified except PG and HI-LO45
My case here in over head welding (5G See below Sketch ) so PG will cover all position expect HI-LO45
For Current and voltage this values are taken already from actual WPS/PQR but according to AWS D1.1 as i told you i need only to convert it to BS EN
this Preliminary WPS as you know actual values will be recorded and written during running of final PQR
Trade name and brand is not mandatory variable here too
Hope it is clear now
Regards,
H.A
On Tue, Oct 20, 2020 at 7:19 PM Mayur Hiremath <hiremath.qaqc@gmail.com> wrote:
--Hello,PG will not cover 6G, Refer attached Welding positions.Also need to change the Current , voltage according to Consumable Manufacturer Data sheet as per the thickness of electrodes. Then heat input <=3KJ/mm.When preparing pWPS parameters need to consider as per data sheet of consumable.Regards,On Tue, Oct 20, 2020, 6:43 PM Hani Al Masry <hanyonalfy@gmail.com> wrote:Dear Vinoth / Expertsi had prepared preliminary WPS as per ISO 15614-1 so please check all parameters and inputs are ok or notadditionally , check if this cover welding positions up to 6G and steel grade S355 and thickness up to 32mmAppreciate your fast action and assistanceRegards,H.A--On Sat, Oct 17, 2020 at 7:40 AM Hani Al Masry <hanyonalfy@gmail.com> wrote:how about· BS EN ISO 15614-1 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
what is the major changes i need to made to the current WPS to convert it from AWS to
On Fri, Oct 16, 2020 at 7:29 AM Vinoth Rajendran <rajvinoth1987@gmail.com> wrote:Please go through EN ISO 15609, EN ISO 15614-1, EN ISO 9606--On Thu, Oct 15, 2020, 18:47 Hani Al Masry <hanyonalfy@gmail.com> wrote:Dear Experts--Our client is asking to convert our WPS from AWS to BS Standardscan you please advisewhich BS standards we need to usewhat the mean steps to be changed according to this BSRequirement of back stip for pipe weldingRegards,H.A
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzfjuGE1OGLGRz%2B7gY0syR5F8ifC9jRFWdyzzR3n7bZDXA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2Ba0BHbLE%2BRtObsF4XaaMcen325c4QbBTeGs4DK5VDC%2ByeQV%2Bg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzeQ36kA5njY74o4nv-c8QPGy7mmKGc4XywouR3mbmCFEg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGQ515wG_%3DMQkEYDQDTVYdM8pW161EpHdbJ_p2MZzqUcDY8jBA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzf_kjM4EoG-WJiB%3DGJQP26NH_-bwBDkhQ5M3_%3DT3SjmPQ%40mail.gmail.com.
No comments:
Post a Comment