Monday, October 12, 2020

Re: [MW:31558] Calibration of Viewer for interpretation of Radiography film

Agreed no Viewer calibration requirements 
On Mon, Oct 12, 2020 at 10:50 AM 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> wrote:
but only Darkness level to be maintained as recommended and Lux meter to be calibrated.

Thanks & Regards

J.Gerald Jayakumar




On Monday, 12 October, 2020, 09:36:00 am GMT+7, George Dilintas <dilintas@gmail.com> wrote:


No there is no viewer's calibration requirmenet

Στις Κυρ, 11 Οκτ 2020 στις 10:03 π.μ., ο/η Manish Kumar <mkmkr431@gmail.com> έγραψε:
Dear Sir,
As per technically, Is Calibration of radiography film viewer need/requirement for interpretation of  radiography film as per ASTM section V article 2, T-234 ASTM 1390-12,ASTM E 1742 ?

Please advise in this concern.                                                                    
Enclo-
Reference documents is attached for ASTM terminology.
--
Regards

Manish Kumar
Inspection(Mechanical) Engineer
PDIL-HURL Barauni site

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHfQ4k48w_%2BXOrPnU_YP2Eg4N8cRcgWhjrXXjm_vXeTyB2p5OA%40mail.gmail.com.


--
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40BXxzAWYOX%3DpPFeHgV%2B%2BUqdfaC-b%3DZomV0cmyQfjyQ51A%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/219634936.320664.1602470977040%40mail.yahoo.com.
--
Best Regards

Regino millan

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAQ8hN345hkyc%2Bx-PdB2v1UrQ1AOm2HJsvyi6QOJt8PYEis7gA%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...