pls reffer the attachment which will help you .
which tells about various codes which follows thumb rules as specified
With regards
vijay kr Konathala
7995602589
On Thu, Oct 22, 2020 at 10:05 AM Rajeev Shukla <gkpshuklaji@gmail.com> wrote:
SirI need to under stand the meaning of this line , and which code I should refer for Compressor received welding.Longitudinal seam in adjacent sections shall not be in same line.--On Saturday, 21 April 2018 at 11:57:35 UTC+5:30 joykol...@gmail.com wrote:Dear Expert,Please suggest Dia range.for WPS as per API 1104.--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c23d7c90-1f2b-4a58-ab4d-651cbde1c374n%40googlegroups.com.
With Regards Vijay Kumar Konathala +91-7995602589 |
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABBJQ_rOGmO2cAkJBRy7G0%2Bnb8FOU8GvoJfg4WOmYeZ5hF_68w%40mail.gmail.com.
No comments:
Post a Comment