Thursday, October 15, 2020

[MW:31563] Re: Which is better material for Seat / Control Valves / Sour Service

<

On Tuesday, 15 March 2011 at 02:59:11 UTC-7 Vino wrote:
Dear Experts,
 
The Data sheet for Control Valve calls for Seat Material of Trim as Stellite 6 + ENP and Supplier is offering SS 316.
Whis is better - Is it Stellite 6 + ENP or SS 316?
 
Info: Service to be used is Sour Service.
Temperature : 60 Degree Centrigrade
Inlet Presure: Max. 0.5 bar g
Otlet Presure: Max. 0.3 bar g
 
Appreciate to see response ASAP.
 
Regards
VPV

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ee25d1de-3735-4b55-8487-ec6241b58d07n%40googlegroups.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...