Re: [MW:29302] RT Sensitivity Not Achieving for Pipe 1 1/2 " Sch 40

Try for fine grain/ slow film, use low Curie source.

On Mon 18 Mar, 2019, 9:24 PM vikram saipogu, <saipoguvikram@gmail.com> wrote:

Dear All,

Please provide me some suggestion,

How shall I achieve sensitivity for lower thickness and lower diameter pipe using Gamma Rays i.e Iridium 192 ?

Client requirements is Radiography by Gamma Rays 

Thanking you

Best Regards,

Vikram Saipogu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.