Yes
You should select the gauge where your test pressure lies in 1/3 to 2/3 position of gauge range i.e. 1.5 times to 3 times for IS & IBR.
For ASME 1.5 to 4 times.
But the best is your test pressure at the middle of the gauge range.
So, gauge 0 - 120 is best selection for 61.
On Mon 18 Mar, 2019, 9:24 PM mithlesh kumar, <mithleshmech47@gmail.com> wrote:
Acc. To which reg.?--Sent from my iPhoneYes--On 17 Mar 2019 2:46 pm, "Mithlesh" <mithleshmech47@gmail.com> wrote:Hii
My hydro pressure required is 61kg/cm2 and i used dial range 0-120kg/cm2 is it acceptable as per IBR?.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment