Dilution for GTAW(TIG) weld may be calculated as below.
20% from P9 side base metal
20% from P11 side base metal.
60% from Filler Metal.
It depends on the specification and Inspector. Alternatively you can weld a small weld Pad normally used for qualifying weld consumable as per ASME Sec.IIC and convince the Inspector.
Thanks & Regards
J.Gerald Jayakumar
0091-9344954677
On Friday, November 3, 2017, 7:06:57 AM GMT+4, Ramsey <kramsey0309@gmail.com> wrote:
We are TIG welding p9 to p11 with 80s-b8 wire. I'm needing to know how to figure what the dilution is there in that weld so that I know what to look for when doing my PMI. Any help would be greatly appreciated.
--
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment