Since it is dissimilar joints, u can match with 304 or 316L. 308 is not bad selection, ref B31,1 for further
On 16-Oct-2017 7:55 am, "José Juan Jiménez Alejandro" <jjjimeneza@gmail.com> wrote:
And your wps?--El 15 oct. 2017 9:17 PM, "'sangram routray' via Materials & Welding" <materials-welding@googlegroups.com > escribió:--Dear group members ;our sub-contractor welded one joint 304 PIPE to 316L valve by ER308 filler but client said its not acceptable.can some one help me regarding above mater .is it Acceptable or not?Answerd with some code or standard reference.Thanks & Regards
Sangramkeshari Routaray
Welding inspector
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment