Friday, October 6, 2017

[MW:26874] RE: 26871] WELDING AND ELCTRODE BAKING PARAMETERS

Hi,

 

A kind suggestion for all your query's …

"Refer consumable  manufacturer recommendations" that is the best guidance for you.

 

 

Thanks & Regards,

Lakshman Kumar B,

+91 9440031459

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Nachhattar Singh
Sent: Friday, October 6, 2017 11:17 AM
To: materials-welding@googlegroups.com
Subject: [MW:26871] WELDING AND ELCTRODE BAKING PARAMETERS

 

Dear all

 

Very simple query just for confirmation that I want to make a WPS and PQR for WCB 216 Material where

I want to do the hard facing with 13% chrome using 2 and 2.5 mm electrodes, work piece is 20 to 30 mm thick,

my queries are as below for Which I need the values with reference:-

 

 

01.   Electrodes baking Temperature (degrees Celsius) …

02.   Duration for baking (hours)…

03.   Soaking temperature and time….

04.   Welding Current (Amperes) for hard facing….

05.   Preheat temperature for hard facing…

06.   Volts for welding (Volts)….

 

 

Thanks and regards in advance

 

N S Gurm

 

 

PLEASE THINK BEFORE PRINTING

 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...