Re: [MW:26911] using of ER308 filer.

And your wps?

El 15 oct. 2017 9:17 PM, "'sangram routray' via Materials & Welding" <materials-welding@googlegroups.com> escribió:

Dear group members ;

our sub-contractor welded one joint  304 PIPE to 316L valve by ER308 filler but client said its not acceptable.

can some one help me regarding above mater .

is it Acceptable or not? 

Answerd with some code or standard reference. 

 

Thanks & Regards

Sangramkeshari Routaray
Welding inspector

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.