Re: [MW:25762] ASME SA105 Quenched and Tempered

for pipes and fitting marking prevails. NCR should be issued and further investigation should be undertaken

2016-11-27 13:26 GMT+02:00 Umar Rashid Makrani <firoz.makrani@gmail.com>:

Dear Mentors,

As per Product specification SA105 marking "QT" is required if the forging is Quenched and Tempered.

in one of the MTC the material mentions as Quenched and Tempered but the marking QT is NOT found.

Please advice 

Regards

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d66a3b8a-9e1f-4238-b3ca-a7151f40ea8d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40BztvrCDQJ11kU2sCYbAJWnS2H2RA24p1GUVvY%2BPCSDOA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.