RE: [MW:25767] Heat treatment impact on defect

PWHT can open up lack of fusion defects which were held closed prior to PWHT by the residual stresses (and were transparent to UT).

Final acceptance is based on the article in its finished condition. NDT before PWHT is carried out so that repairs on the defects detected at that stage are cleared at that stage.

 

Alan Denney

AKD Materials Consulting Ltd

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Zakaria ghrab
Sent: 28 November 2016 08:52
To: materials-welding@googlegroups.com
Subject: Re: [MW:25766] Heat treatment impact on defect

 

In that case what'is the  advantage to perform NDE after PWHT.

 

Thank you.

 

2016-11-27 15:49 GMT-01:00 George Dilintas <dilintas@gmail.com>:

Not at all unless you "burn" it

 

2016-11-24 17:06 GMT+02:00 Zakaria ghrab <zakaria.ghrab@gmail.com>:

Dear expert,

 

  Could you please give us your feedback & return experience about impact of PWHT (Heat treatment in general) in defect.

 

Could  size of porosity (volumic defects) can change after PWHT especially for ally steels ?

Any information for surfacic defects ?

 

Could you please confirm and give us some reference from codes and/or litterature.

 

Thank you very much.

 

--

 

Thanks and Regards, 

-----

زكرياء غراب
GHRAB Zakaria 

Tunisia : +216 96 635 805

Yesterday is the past, tomorrow is the future; and today? Today is the present, the gift: Enjoy it!

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAD8EeB252bTKqszekuaTvYBKSJcuLQ%3DU2c_gRmfDOzXrOkCYqQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

 

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40DSNS2Rq%2B8hsqktnU6U-cBXgreF93xKXK-g%3DS2xXDn%2B_A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

 

--

 

Thanks and Regards, ?

-----

زكرياء غراب
GHRAB Zakaria 

Tunisia : +216 96 635 805

Yesterday is the past, tomorrow is the future; and today? Today is the present, the gift: Enjoy it!

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAD8EeB2Z%2B%3DcBXEYsB-r9SBzD3hBZAkHH9Y58oywvET0S2uYOKg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.