Re: [MW:25714] Why xray are use for lower thickness

Dear prem and George sir,

Thanks for reply.
I want to ask that if I use the high sourse ir192 and increase the exposure time i.e. time as required by calculation, can I get the good radiographs and using iqi of din standard.
Our thickness of pipe is below 4mm.
We required genuine and technical reason to insist to contractor.
Requesting for response.

Regards
Prasad

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/146532af-75e9-4a75-bde1-3bbf68a60302%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.