Re: [MW:25667] Tube to Tubesheet Joint

Mock up qualification as per section IX with ten tubes required. Additionally pull test is to be done.

On 12 Nov 2016 12:29 p.m., "pankaj phuse" <pankaj.phuse@gmail.com> wrote:

Dear Experts,

Need your guidance on the following:

We have tube to tube-sheet joint having Groove + Fillet Weld without grooves & expansion. (Tube-2.7mm, Tubesheet-45mm, P No.43 to P. No.43)

I have PQR qualified on plate 10mm Thk. (P No.43 to P No.43, Qualification Range - 1.5 to 20mm).

Can I use the same WPS for this joint or we have to qualify new procedure.

Procedure qualified as per ASME Sec.IX.

Need clarification with reference to clause number.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a0bf2487-921c-40df-a1f4-cc6886e07182%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2B6Tn1%2BwU0BFda5kocd87x1j_O1VRt7ahiSiVNFH0bJxNmVJNw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.