In lower thickness X Ray will give you a better sensitivity.
Regards
Prem Nautiyal
9769316004
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Prasad Rode <purode333@gmail.com>
Date: 13/11/2016 13:21 (GMT+05:30)
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:25675] Why xray are use for lower thickness
Why xray are commonly used for thickness of material 5mm and below.
Is gamma ray, will take more exposure time. Or any other good technical reason.
Regards
Prasad
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/e7d6067f-53ff-40c1-886f-f18ea3dd6f5b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment