Re: [MW:25717] Why xray are use for lower thickness

Sir
Radiographs with x Ray have high definition and good weld image for review compared to gamma ray

Sent from my iPhone

> On Nov 16, 2016, at 11:48, Prasad Rode <purode333@gmail.com> wrote:
>
> Dear prem and George sir,
>
> Thanks for reply.
> I want to ask that if I use the high sourse ir192 and increase the exposure time i.e. time as required by calculation, can I get the good radiographs and using iqi of din standard.
> Our thickness of pipe is below 4mm.
> We required genuine and technical reason to insist to contractor.
> Requesting for response.
>
> Regards
> Prasad
>
> --
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> To post to this group, send email to materials-welding@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/146532af-75e9-4a75-bde1-3bbf68a60302%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/88824DF2-C734-468C-8411-7E1CFDA7FC04%40gmail.com.
For more options, visit https://groups.google.com/d/optout.