Dear Mentors,
As per Product specification SA105 marking "QT" is required if the forging is Quenched and Tempered.
in one of the MTC the material mentions as Quenched and Tempered but the marking QT is NOT found.
Please advice
Regards
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d66a3b8a-9e1f-4238-b3ca-a7151f40ea8d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment