Taking into account that your Pno is 43 you may benefit of the provisions of QW 202.4.
However before take a final decisions check the requirements of QW 202.6
2016-11-12 16:23 GMT+02:00 'prem_nautiyal26' via Materials & Welding <materials-welding@googlegroups.com>:
HiAssuming your construction code is ASME SEC VIII div.1,You will have to carry out a separate tube to tube sheet mock up qualification.Refer ASME SEC IX and SEC VIII Div 1 for details.Also tube to Tube sheet mock up qualification will be mentioned in your approved QAPREGARDSPREM NAUTIYAL9769316004Sent from my Samsung Galaxy smartphone.-------- Original message --------From: pankaj phuse <pankaj.phuse@gmail.com>Date: 11/11/2016 16:15 (GMT+05:30)To: Materials & Welding <materials-welding@googlegroups.com >Subject: [MW:25662] Tube to Tubesheet Joint--Dear Experts,Need your guidance on the following:We have tube to tube-sheet joint having Groove + Fillet Weld without grooves & expansion. (Tube-2.7mm, Tubesheet-45mm, P No.43 to P. No.43)I have PQR qualified on plate 10mm Thk. (P No.43 to P No.43, Qualification Range - 1.5 to 20mm).Can I use the same WPS for this joint or we have to qualify new procedure.Procedure qualified as per ASME Sec.IX.Need clarification with reference to clause number.
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ .a0bf2487-921c-40df-a1f4- cc6886e07182%40googlegroups. com
For more options, visit https://groups.google.com/d/optout .
To view this discussion on the web visit https://groups.google.com/d/--
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .msgid/materials-welding/ .3vk1jfblmfkop6qg13yd2on8. 1478960138453%40email.android. com
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40CvE1uMPy%3D9tkh3nNYYM1LCpvxobZhbQWbZivqGgJXMXA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment