Sunday, July 5, 2015

[MW:23137] PWHT on Channel or bonnet of HX with 6 or more tube passes

Can anybody explain to me why its stated in latest API660 for this requirement? Its not stated any reason why is shall be PWHT due to lethal sevice or regarding thickness

Shiha

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BidF73McQcrTbqHxWuowQnMHXx9tgnYkDTHC%2Byhw40kodVpvA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...