Re: [MW:23176] Re: Want to understand the "Product analysis"

Hi

Refer to ASTM A6 AND A 20 for details regarding product analysis

On Mon, Jul 13, 2015 at 9:29 PM, Umar Makrani <firoz.makrani@gmail.com> wrote:

In technical delivery conditions the client mentions 

"S19. Restricted chemistry: Carbon Max 0.2% and Vanadium Max.XX% restricted for heat and product analysis,"

In context of SA20, should the supplementary requirement S2 be invoked?

 

 

Thanks & Regards

 

Firoz Ahmed R. Makrani, PMP®

On 13 Jul 2015, at 7:17 pm, Dark_Horse <srinivas.sreeram@gmail.com> wrote:

Product analysis is always on basis of Heat No and it is done on sampling basis.   In case of coils, it is done from drawing sample from both front and tail end of the coil.  for it is illogical to take it from centre of the coil !!!.

If buying from a trader, possible plates may  belong to different heat, then buyer to advice whether they want 100% testing or random samples.

sreeram

On Thursday, July 9, 2015 at 1:11:45 PM UTC+4, Umar Rashid Makrani wrote:

Further,

The client requirement is" S19. Restricted chemistry: Carbon Max 0.2% and Vanadium Max.XX% restricted for heat and product analysis, can I interpret this as a supplementary requirement S2of SA20?

On Wednesday, July 8, 2015 at 1:35:52 PM UTC+3, Umar Rashid Makrani wrote:

Dear Mentors,

For Material ASTM A516 Gr 70 the client requirement is based on product analysis. Does that mean that all plates shall be tested for product analysis? or certain plates from that heat is enough to report that as product analysis.

Thanks in advance for your kind advise if possible with citation.

Best regards,

Umar.

--
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/NDLX5-JcODk/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/825d64ec-6610-4c26-bc2f-b715b0f09f74%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/11598EFD-EDBA-4DBD-9241-0E966A0DDD34%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC-DWStukOiRuN9mXhNLw977Bz%3D%3Dbh9iwhOKaSQ6A4u7tz%2BSVA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.