[MW:23213] Re: Welding of Pressure Vessel Parts

Limitation of position welding and spray type metal transformation .

Thanks

Vinay Tripathi

9643886124(India)

 

On Saturday, July 25, 2015 at 5:03:57 PM UTC+5:30, Vivek wrote:

Dear Experts

My question is that is ASME Sec VIII or AWS D1.1 or any other codes Prohibit manufacturer to use the GMAW welding process, and if we can use GMAW welding what care we should take while welding Parts of Pressure Vessels

In general i have seen people using TIG welding or SMAW welding , sometimes FCAW too but why not GMAW

Thanks

Vivek

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3b0e82df-d1c1-4748-b27a-d6947272b349%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.