Re: [MW:23200] Thickness under insulation

Inspection plugs to be installed for checking thickness at TML area for insulated lines.
Regards,

M.S.Viswanathan

--------------------------------------------
On Sun, 5/3/15, S.Mohammed <mohd52100@gmail.com> wrote:

Subject: [MW:23199] Thickness under insulation
To: materials-welding@googlegroups.com
Date: Sunday, May 3, 2015, 11:26 AM

We know that thickness
under insulation is checked by RT.
What RT technique one.should use to.determine
correct pipe thickness?



--

You received this message because you are subscribed to the
Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.

To post to this group, send email to materials-welding@googlegroups.com.

Visit this group at http://groups.google.com/group/materials-welding.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANX-_HFrHgxi_8R-SkLDcCLpwp1Q67p%3D6-wgf_R%3D74cbMyZcSw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1430643844.66076.YahooMailBasic%40web122604.mail.ne1.yahoo.com.
For more options, visit https://groups.google.com/d/optout.