Please don't publish unacceptable conclusion and you dont know the Consequence.
Regards,
S.SENTHILKUMAR
--------------------------------------------
On Thu, 27/11/14, Nandesh Kumar <nandeshkumar@rocketmail.com> wrote:
Subject: Re: [MW:22387] Radiographic density
To: materials-welding@googlegroups.com
Date: Thursday, 27 November, 2014, 10:24 AM
Even though, it is not
advisable, you can use 'Potassium Permanganate
solution' for decreasing the density!
ವಂದನೆಗಳೊಂದಿಗೆ / Best
regards,
Nandesh Kumar
Arasappa
P.S. : Please
don't print this e-mail unless you really need to.
--------------------------------------------
On Thu, 27/11/14, meisam shokri arfaei <meisamshokri@gmail.com>
wrote:
Subject: Re:
[MW:22381] Radiographic density
To: materials-welding@googlegroups.com
Date: Thursday, 27 November, 2014, 12:12 PM
Dear
friend,No way. However before film processing you could
balance the density with the time of
development and
actually this is not
recommended.
Regards
On
Wed, Nov 26, 2014 at
7:00 PM, S.Mohammed
<mohd52100@gmail.com>
wrote:
Dear
all
Is there any way to.correct RT film
density(high or low)
after RT?
We have some joints rehsoot due to density
which cant be
re RT due to line put into
service.
Regards
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this
group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this
group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group
are members
personel views and meant for
educational purposes only,
Users must take
their own decisions w.r.t. applicable
code/standard/contract documents.
---
You
received this message because you are subscribed to the
Google Groups "Materials &
Welding" group.
To
unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.
--
M. Shokri ArfaeiISA-ISTS
- Metallurgy Lab.
ManagerASNT NDT
Level IIIInternational Welding
Engineer
Tel.:
+98 21 66282127Fax:
+98 21
66282779Mob.:+98 912 1394023
--
To post
to this group, send email to
materials-welding@googlegroups.com
To unsubscribe from this
group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this
group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group
are members
personel views and meant for
educational purposes only,
Users must take
their own decisions w.r.t. applicable
code/standard/contract documents.
---
You
received this message because you are subscribed to the
Google Groups "Materials &
Welding" group.
To
unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.
--
To post to
this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg
at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged
in this group are members personel views and meant for
educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract
documents.
---
You received
this message because you are subscribed to the Google Groups
"Materials & Welding" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
materials-welding+unsubscribe@googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
[MW:35346] Cast-iron welding
Any advice for cast iron welding Sent from Yahoo Mail for iPhone
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment