Dear Lalu,
Since both are under same P No. Requalification of WPS is not required.
Thanks and Best Regards,
K.Rajagopal
On Thu, Nov 20, 2014 at 12:06 PM, LALU RAJENDRAN <lalucpt@gmail.com> wrote:
Dear Sirs,Noted your valuable suggestions. Hence we are using same filler material for these two materials, please advise whether we need seperate qualification is needed.Thank you,LALU
On Thu, Nov 20, 2014 at 9:27 AM, 'Prakash Hegde' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Hi!Generally it is always preferred to weld Inconel 825 by NiCrMo3 rather than NiFe Cr1 (Equivalent of 825) due to avoid fissures like defect after PWHTRegardsHegdeOn Thursday, 20 November 2014 10:09 AM, "Amitabha.Bhattacharya@voestalpine.com" <Amitabha.Bhattacharya@voestalpine.com> wrote:
--Hi Lalu,Even though the chemical properties of ER NiCrMo3 not fully matching with BM chemistry of Incoloy 825 , this filler alloy is widely used because of its availability.Please look into the attached PDS of ERNiCrMo-14 (Thermanit 686) which is a matching filler alloy and suitable for higher temperature service conditions.Hope this helps…With RegardsAmitabha BhattacharyaHead-Application Technologyvoestalpine Bohler Welding India Pvt. Ltd.voestalpine Bohler Application Technology CentreFrom: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Lalu r p
Sent: Wednesday, November 19, 2014 8:45 PM
To: materials-welding@googlegroups.com
Subject: [MW:22291] Welding of Inconel 625 & Incoloy 825Dear Experts,Can we weld Incoloy 825 with inconel 625 consumables ? Since both are under same P number but the chemical combination is different.Looking forward your valuable response.regards,LALU--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Comments