Re: [MW:22324] ASME Sec II, Part C, SFA 5.18, TIG ROD LENGTH

BEGIN:VCARD
X-LOTUS-CHARSET:UTF-8
VERSION:3.0
PRODID:-//Lotus Development Corporation//NONSGML Notes 8.5.2//EN_C
FN:George H Dilintas/GRC/VERITAS
N:Dilintas;George;;;
ADR;TYPE=WORK;TYPE=PREF:PIRAEUS;;23\, Etolikoy Str.;PIRAEUS;;185 45
;GREECE
ADR;TYPE=HOME;TYPE=PREF:;;19-21 B. Laskou str.;Athens;Attika;11 633
;Greece
TEL;TYPE=HOME:+30-1-7667 197
TEL;TYPE=WORK:+30-210-40 63 113
TEL;TYPE=HOME;TYPE=FAX:+30 - 1 - 7667 197
TEL;TYPE=WORK;TYPE=FAX:+30-210-40 63 118
TEL;TYPE=CELL:+30 -69 44-64 62 04
EMAIL;TYPE=WORK;TYPE=PREF;TYPE=INTERNET
:george.dilintas@gr.bureauveritas.com
ORG:Bureau Veritas;Industry
REV:20131201T024559Z
END:VCARD

Just open a NCR which you will close following an analysis of your welding eng. that this deviation is not going to affect the quality of the welds

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor


I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS

Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)

Saravanan Sornam ---21/11/2014 17:44:09---Dear ASME Specialists , in ASME Sec II, Part C, SFA 5.18, Table 8 for standard Sizes,

From: Saravanan Sornam <saravanshyla@gmail.com>
To: materials-welding@googlegroups.com
Date: 21/11/2014 17:44
Subject: [MW:22313] ASME Sec II, Part C, SFA 5.18, TIG ROD LENGTH
Sent by: materials-welding@googlegroups.com

---

Dear ASME Specialists ,

in ASME Sec II, Part C, SFA 5.18, Table 8 for standard Sizes,

for GTAW straight lengths , under Note b,

Length shall be 900 + 25 mm / -0 Tolerance given.

Is it Mandatory to follow, because we received GTAW rod size of 1000 mm actual and the Mill sheet also mentioned 1000 mm, but this Note b is allowed up to 925 mm only.

During ASME joint review Audit, how to explain this to the Auditor.

Regards,
Saravanan.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com