Dear friend,
Even if any code or standard reference another standard or code like ASME Sec. V, all works should be under your "written practice". Most of standards just push you to have written practice in which you define level of qualifications and their responsibilities and depends on your previous experience.
Regards
Even if any code or standard reference another standard or code like ASME Sec. V, all works should be under your "written practice". Most of standards just push you to have written practice in which you define level of qualifications and their responsibilities and depends on your previous experience.
Regards
From: george.dilintas@gr.bureauveritas.com
Sent: 11/26/2014 15:13
To: materials-welding@googlegroups.com
Subject: Re: [MW:22368] ASME SEC-V , VT requirements for QC Inspector
In Section VIII-1 there is no formal qualification requirement for VT.
Thus, You do not need NDT company to perform VT.
Such a requirement exists in Section B31.1 but with no reference to section V, but again you do not need a NDT company for VT. You may establish an internal qualification scheme for VT in that case.
- best regards
Dr. Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment