Re: [MW:22319] ASME Sec II, Part C, SFA 5.18, TIG ROD LENGTH

not mandatory

THANKS & BEST REGARDS

KG.PANDITHAN, AWS-CWI, CSWIP 3.1

CONSULTANT-WELDING & QUALITY

On Fri, Nov 21, 2014 at 8:13 AM, Saravanan Sornam <saravanshyla@gmail.com> wrote:

Dear ASME Specialists ,

in ASME Sec II, Part C, SFA 5.18, Table 8 for standard Sizes,

for GTAW straight lengths , under Note b,

Length shall be 900 + 25 mm / -0 Tolerance given.

Is it Mandatory to follow, because we received GTAW rod size of 1000 mm actual and the Mill sheet also mentioned 1000 mm, but this Note b is allowed up to 925 mm only.

During ASME joint review Audit, how to explain this to the Auditor.

Regards,

Saravanan.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.